|
|
| Live
Center |
.jpg) |
.jpg) |
| Model
|
Available In Taper Sizes |
| EXTRA
LIGHT DUTY |
MT-1, 2 & 3 |
(Double
Bearing)
|
(Plain
Point only)
|
|
|
| DOUBLE
BEARING |
MT-3,
4 & 5 |
|
(Plain & Carbide Tipped Points)
|
|
|
|
| STANDARD
|
MT-1,
2, 3, 4, 5 & 6 |
(Heavy
Duty Triple Bearing)
|
(Plain, Carbide Tipped, Female, Extended, HSS Tipped
Points)
|
|
|
| EXTRA
HEAVY DUTY |
MT-3,
4, 5 & 6 |
(Four
Bearings)
|
(Plain,
Carbide Tipped and Extended Points)
|
|
|
| EXTRA
HEAVY DUTY WITH INTER CHANGABLE POINT |
MT-3,
4 & 5 |
(Four
Bearings)
|
|
|
|
| SUPER
EXTRA HEAVY DUTY |
MT-4,
5, 6 & 7 |
(Four
& Five Bearings)
|
(Plain
& Carbide Tipped Points)
|
|
|
| JUMBO
HEAVY DUTY |
MT-5
& 6 |
|
(Plain
Point only) |
|
|
APPLICATION
:
For Conventional Slow Speed Lathes
All Centers are sealed for entry of coolant and swarf
/ chips by special sealing arrangement.
Each center provided with an inspection report covering
all critical parameters like run out, correctness of Morse
Taper angle etc.
Precision Ground. Maximum radial run out within 0.015mm.
Closer run outs can also be provided against request.
TRUMAX offers India's largest range of Live centers
to suit specific needs.
Body made alloy steel case hardened and tempered to a
hardness of 32 - 40 HRc approx.
Point made from bearing steel and hardened to 60 HRc approx.
for maximum wear resistance.
Live Centers broadly confirm to IS 3793 - 1966 |
|
LIVE CENTER HIGH SPEED CENTERS |
 |
| Model
|
Available
In Taper Sizes |
| Copy
Turning Centrers : Light Duty |
MT- 3 & 4 . 3200 rpm) |
(3
Bearing, High Speed - Max
|
(Plain
& Carbide Tipped Points)
|
|
|
| CNC
Centers : Heavy Duty |
(MT-
3, 4, 5 & 6 |
(4
Bearing, High Speed – Max. 5000 rpm)
|
(Plain & Carbide Tipped Points)
|
|
|
|
| CNC
Centers : Extra Heavy Duty |
MT-
4, 5 & 6 |
(4
Bearing, Medium Speed – Max.2500 rpm)
|
(Plain & Carbide Tipped Points)
|
|
|
|
APPLICATION
: For
turning at high speeds upto 5000 rpm max. (Capable of
withstanding high loads at high rpm).
Assembly consists of high precision Angular Contact Bearings
packed with high temp. / high speed grease like the Kluber
ISO Flex NBU 15 (Germany) or equivalent
Extended point provided as standard. Other point shapes
and carbide tips against request. |
|
|
