|
|
| Universal
Strap Clamp |
| For
Power Presses, Milling Drilling, Shaping, Boring etc.
|
Universal Strap Clamp is very useful for job clamping
on 'T' slot table of Drilling, Milling, Shaping, Boring,
Power Press and other machine tools. No supports are required
at the rear of the clamp since the body of the clamp is
self-positioning as the rear P!3rt rests on the table
and front holds the job. The body positions itself with
the help of swival hinge pin according to the thickness
of the workpiece, the T -Bolt remaining in vertical position
and the nut is tightened on the flattened portion of swival
hinge pin. Clamp is supplied complete with hardened T
-Bolt & special nut.
|
|
|
 |
|
| |
|
| Mould
Clamp |
| For
Plasting Injection Moulding And Pressure Die Casting Machines
|
Mould Clamp is designed specially for low height applications
only such as clamping of moulds on plastic injection moulding
machines & pressure die casting machines. The compact
front portion of the clamp enables it to penetrate into
the limited clamping area of the mould and clamp it. The
positioning of forged swival washer on required curved
groove enables the operator to set the center distance
between the clamping portion and the clamping bolt as
per the nearest tapped hole available on platen (where
there are no T -slots). No supports are required at the
rear of the clamp as the rear portion rests on the platen
and front holds the mould. Flanged nut is tightened on
the swival washer which takes care of the positioning
of clamp body. These clamps are equally useful on pressure
die casting machines, hydraulic presses & power presses
where low height clamping is done.
|
|
| Mould
Clamp - With Clamping Stud |
 |
| Mould
Clamp - With T-Bolt |
 |
|
|
|
