|
|
| Heavy
Duty Pinch Clamp |
| For
Milling, Planning, Plano-Milling etc. |
Heavy Duty Pinch Clamp is a heavier version of Low Height
Pinch Clamp. Basic function is same but this is used for
clamping from sides of heavy blocks or thicker plates
for facing of top face in one setting. Body is made of
hardened alloy steel. It is most useful in milling, shaping,
planning, plano-milling & jig boring machines. Supplied
complete with hardened T -Nuts & Standard Allen Bolts
|
|
|
 |
|
| |
|
| Mini
Pinch Clamp |
| For
Milling, Shaping & Planning |
Mini Pinch Clamp is useful for clamping of thin plates
form side faces. Body made of hardened alloy steel is
in the form of a T -Nut which slides easily into the T
-slot. When rear screw is tightened, the clamp is held
tightly with the T -slot and then by tightening the front
bolt, it gives a downward as well as forward clamping
force to the job. Only a required small portion of the
clamp comes above the surface of T -Slot table, rest of
the body of clamp remains under the top surface of the
T -Slot table. Hence, it can clamp thinnest plates positively
and still remain under the top level of the job. This
clamp is most suitable for top facing of thin plates on
milling, shaping and planning machines.
Supplied complete with standard front & rear screws
|
|
|
|
|
